Business

Tips For Getting Your Motorcar Through Its MOT

Do you know that 40% of automobiles fail their MOT tests on the first try? Yet, to make matters worse, about 50% of all errors discovered throughout the test might have been prevented! Before you attend the Book MOT London test centre, perform a few quick inspections and maintenance tasks to assist your car pass the MOT the first time. This will save you time and money. Here are some of the best preventative measures you can take to pass your MOT.

Lights:

According to the DVSA, 30% of all MOT problems involve your car’s lights. One of the simplest checks you can run at home is to check your lights, which is a blessing. All you need to do is turn on your headlights, fog lights, indicators, and hazards. To make sure they are all in functioning order, get a companion to watch your brake lights from behind the car as you apply the brakes to check whether they illuminate.

Furthermore, keep in mind that having lights that are the wrong colour might result in a failed MOT. You should confirm that your lights are lawful if they weren’t installed by the makers. White for the headlights and red for the brake lights Book MOT London.

Tread depth on a tyre:

Moreover, a failed MOT test due to incorrect tread depth is possible. Tyres with little tread have limited traction and might jeopardise your safety. So you should check their depth regularly at home. More significantly, if the tread depth is less than 1.6 mm, the tyre is unlawful.

Tread Condition:

As these flaws can also cause an MOT test failure, you should inspect your tyres for sidewall damage, including cracks, cuts, lumps, and bulges. If you do discover such damage, get in touch with a tyre expert right away because these factors may reduce the safety of your MOT Chingford.

Windscreen:

The road ahead must be visible to you at all times while you are driving or you run the risk of failing your MOT test. You will need to get your windscreen swapped if there is any damage on the windscreen bigger than 10 mm in the sweeping area directly in front of the driver (referred to as “zone A”) or 40 mm in the remaining area of the windscreen (referred to as “zone B”). Make sure a professional thoroughly analyses any damage before you go to the MOT test since it may need to be fixed if it is bigger than 10mm.

Make sure that everything that might obstruct eyesight is getting cleared away. Any stickers, toys, or other anything that is directly in the driver’s line of vision will also cause the car to fail the test.

Wipers and washers:

Your windscreen wipers and washers aid in the driver’s ability to see the road, even though they may not appear essential to road safety. Check to see if your wipers are functional and whether they are damaged before going to your MOT test, and you should also reapply screen wash and check your washers.

Brakes:

If you’ve noticed that they aren’t working as well as they once did, are making unusual noises, or are causing your car to pull to one side when you brake, you should get your brakes tested right away. In addition to putting you and other drivers on the road in danger, brakes that are broken or malfunctioning will immediately fail an MOT test. It is also important to check the amount of your brake fluid and top it off if it has depleted below the required levels.

Safety belts:

You must inspect each seat belt’s complete length to make sure there is no damage. If you want your car to pass the MOT test, all of your car’s seat belts must be functional and in excellent shape. Each belt should also be tugged to make sure it can withstand the strain you would expect and then you should inspect it to make sure it can lock firmly in place.

Vehicles’ bodies:

Make sure your car’s body hasn’t sustained any significant harm such as rough edges that may hurt other cars or pedestrians. Also, cleanliness is not a factor in the MOT Chingford test. It is still a good idea to clean your car before the inspection because some MOT testers will refuse to test a dirty vehicle.