Why is it a good idea to go for Concrete Dincel Walls right now?

The majority of the apartment buildings are using conventional column-slab and in-fill wall systems. These in-fill walls are usually constructed from plasterboard and stud, brick and masonry, or autoclaved aerated concrete. Even though these walls are intended to satisfy fire prevention and acoustic requirements, they aren’t load-bearing. It is the load-bearing columns that perform this essential task along with concrete slabs constituting the floors of the apartment. Because of this, lots of steel and concrete will be required for constructing apartment buildings that make use of the conventional technique. It is essential for load-bearing columns plus the concrete slab to be well-reinforced and thick.

On the other hand, concrete dincel walls provide an alternative to this conventional method. Apart from enabling them to minimize the amount of materials required in the construction procedure, it also aids in minimizing expenses and construction time. Let us find out the benefits of using dincel walls at present.

Reductions in cost

Similar to the traditional in-fill walls, a dincel wall will exceed all sorts of fire safety and BCA acoustic specifications. They are likewise load-bearing compared to the traditional walls. As a result, no load-bearing columns will be required, and it’ll be possible to minimize slab thickness to a great extent as well.

The minimum slab thickness happens to be 200 mm while making use of an in-fill wall system. On the other hand, the minimum slab thickness happens to be only 150 mm in the case of dincel walls.

One should likewise consider transfer slabs in apartment structures. While using dincel, no transfer slabs will be required in case the party walls are positioned at right angles to the aisle way of the building. This can result in reductions of expenses up to 23% while using dincel rather than an in-fill wall system.

Helps to save time

One more notable benefit of using concrete dincel walls is that it helps to save time. Overall, it is possible to minimize construction time by as much as 30% to 40%. It is feasible since the task of constructing load-bearing walls becomes simple due to the system’s panels, thanks to their revolutionary snap-lock technology. Anyone will be able to handle the panels and carry them since they are light in weight.

It is a fact that mesh reinforcement can likewise be utilized in floor slabs which helps to alleviate the requirement for heavy steel reinforcement. It implies that it is possible for the slabs to be thinner by at least 50 mm compared to the conventional technique. Moreover, the process of installation is simple just like the installation of Concrete Kerbs and gutters. It is possible to install dincel walls plus concrete slabs simultaneously although the conventional process needs the columns to be installed first and then the floor slabs.

Conclusion

Simply speaking, one can consider dincel to the method of constructing load-bearing walls in the future. It has been accepted by lots of commercial, industrial, and residential buildings right now.